Inline Fuse Holder - Wiring
This page describes how to wire the inline fuse holder.
Insert the 5A fuse inside of the inline fuse holder and close the cap.
Insert a 1 in 1 Out splicer on to one of the wires of the inline fuse holder.
Insert a Red - 4.8mm female spade crimp terminal wire into the other end of the 1 in 1 out splicer.
Connect the female spade end of the Red - 4.8mm female spade crimp terminal wire to the positive terminal on the 12V battery.
Combine another 1 in 1 out splicer to the current one and insert the other end of wire for the inline fuse holder.
Insert a Red - 4.8mm female spade crimp terminal wire into the remaining terminal of the newly added 1 in 1 out splicer.
Connect the female spade end of the Red - 4.8mm female spade crimp terminal wire to the middle terminal of the Rocker switch.
Combine the two 1 in 1 out splicers of the inline fuse holder with the 1 in 1 out splicer for the power plug.
Place the inline fuse into the smaller opening on the battery bracket.
Last updated