Power Panel Assembly

This page describes how to assemble the power panel to later be assembled on the Interface Lip .

Completed Power Panel assembly

Parts Needed

Instructions

  1. Slide the Power Panel-Dust Cap over the barrel of the Power Plug.

Attaching dust cap to power- plug

  1. Insert the Power Plug with dust cap into the top of the smaller hole on the power panel.

Inserting power plug into power panel.

  1. Secure the Power Plug and dust cap with the Power Plug-nut.

  1. Insert the Rocker switch into the remaining larger hole on the power panel.

Inserting the Rocker Switch into the power panel
PreviousBattery Bracket AssemblyNextInterface Lip Assembly

Last updated