Junction Box Assembly

This page describes how to assemble the junction box on the frame assembly.

Completed Junction Box assembly

Parts Needed

Instructions

1. Place the 12V Battery inside of the junction box with its terminals facing away from the edge of the junction box.

Inserting the 12V battery.

1. Insert the Riser Slot Battery Bracket Assembly on to the junction box with the smaller rectangle placed on top of the battery.

Attaching the Riser slot battery bracket assembly

1. Place the Interface Lip Assembly on top of the Riser Slot Battery Bracket Assembly inside of the junction box with the power panel portion oriented closer to the battery.

Attaching the Interface Lip assembly to the riser slot battery bracket assembly

1. Add a Junction Box Case screw to each of the holes in the four corners of the Interface Lip Assembly and tighten using the Philips # 3 screwdriver.

Securing the Interface-Lip assembly