Inline Fuse Holder - Wiring

This page describes how to wire the inline fuse holder.

Completed inline fuse holder

---

1. Insert the 5A fuse inside of the inline fuse holder and close the cap.

Inserting 5A fuse.

1. Insert a 1 in 1 Out splicer on to one of the wires of the inline fuse holder.

1 in 1 out splicer added to one of the wires of the inline fuse holder.

1. Insert a Red - 4.8mm female spade crimp terminal wire into the other end of the 1 in 1 out splicer.

Female spade crimp terminal wire added to the other end of splicer.

1. Connect the female spade end of the Red - 4.8mm female spade crimp terminal wire to the positive terminal on the 12V battery.

Inline fuse holder connected to the 12V battery.

1. Combine another 1 in 1 out splicer to the current one and insert the other end of wire for the inline fuse holder.

Second 1 in 1 out splicer added with other wire of inline fuse inserted.

1. Insert a Red - 4.8mm female spade crimp terminal wire into the remaining terminal of the newly added 1 in 1 out splicer.

Red-4.8mm female spade crimp terminal wire inserted into second splicer.

1. Connect the female spade end of the Red - 4.8mm female spade crimp terminal wire to the middle terminal of the Rocker switch.

Inline fuse holder connected to the rocker switch.

1. Combine the two 1 in 1 out splicers of the inline fuse holder with the 1 in 1 out splicer for the power plug.

Inline fuse holder splicers combined with power plug splicer.

1. Place the inline fuse into the smaller opening on the battery bracket.

Inline fuse placement.