Interface Lip Assembly

This page describes how to assemble the Interface Lip later to be used in the junction box assembly.

Completed Interface Lip assembly

Parts Needed

Instructions

1. Insert the Blank Panel into one of the 2 panel openings on the Interface Lip and tighten using the small screwdriver and two #4 screws.

Attaching the blank panel to the Interface Lip

1. Insert the assembled Power Panel into the remaining panel opening on the Interface Lip and tighten using the small screwdriver and two #4 screws.

Attaching the power panel to the Interface Lip

1. Insert an Interface Lip -Tab in each of the four-tab cut-outs on the Interface Lip.

Inserting the Interface Lip Tabs