Wheel Coupler Assembly

This page describes how to assemble the motor wheel coupler, to be used when added the wheels to the motors.

Assembled motor wheel coupler.

Parts Needed

1

Insert four M4 nylon lock nuts into the hex cut-outs in the coupler body.

four M4 nylon lock nuts being inserted into the coupler body

2

Align the small post on the Clamp body halves with the “U” shaped cut-out on the coupler body and slide the two C-Clamps together into the U-shape cut-outs.

Attaching the C-Clamps to the coupler body.

3

Insert an M4 x 16mm screw along with an M4 nylon lock nut into the clamp body halves and loosely tighten using the 3mm drive hex L-key.

Do not tighten. screws should be very loose.

Inserting M4 x16mm screw with M4 lock nuts.

4

Repeat steps 1-3 for the remaining 3 motor wheel couplers.